Supported hardware: Difference between revisions
Uwe@flashrom.org/ (talk) ("Uwe@flashrom.org/: *Empty MediaWiki Message*") |
Uwe@flashrom.org/ (talk) ("Uwe@flashrom.org/: →External flashers/programmers: ") |
||
| Line 9: | Line 9: | ||
'''3Com network cards:''' | '''3Com network cards:''' | ||
Flashrom supports some [[ | Flashrom supports some [[NIC3Com|3Com network cards]] to reflash the flash attached to these cards, but it is also possible to use these cards to reflash other chips which fit in there electrically. Please note that the small number of address lines connected to the chip may make accessing large chips impossible. | ||
'''FTDI FT2232H/FT4232H-based USB-to-serial controllers:''' | '''FTDI FT2232H/FT4232H-based USB-to-serial controllers:''' | ||
Flashrom supports usage of external FTDI [[ | Flashrom supports usage of external FTDI [[FT2232SPI Programmer|FT2232H/FT4232H-based USB-to-serial controllers]] as SPI flashers. | ||
Revision as of 17:46, 3 December 2023
Template:Flashrom supported chips and devices
External flashers/programmers
Silicon Image (SiI) SATA/IDE controllers:
Flashrom supports some SiI SATA controllers to reflash the flash attached to these controller cards, but it is also possible to use these cards to reflash other chips which fit in there electrically. Please note that the small number of address lines connected to the chip may make accessing large chips impossible.
3Com network cards:
Flashrom supports some 3Com network cards to reflash the flash attached to these cards, but it is also possible to use these cards to reflash other chips which fit in there electrically. Please note that the small number of address lines connected to the chip may make accessing large chips impossible.
FTDI FT2232H/FT4232H-based USB-to-serial controllers:
Flashrom supports usage of external FTDI FT2232H/FT4232H-based USB-to-serial controllers as SPI flashers.